INSTALL

Install the rpms in the following way and order:

• rpm -Uhv rsbac-admin-1.2.N-bfM.fcX.NN.i386.rpm
• rpm -ihv --oldpackage kernel-2.6.x-rsbac_v1.2.N_bfM_pax_soft.i686.rpm

If you want to try also the scripts

• rpm -Uhv rsbac-scripts-N-fcX.NN.noarch.rpm

NOTES:

• It could happen that the kernel option "rsbac_softmode" is added also to non rsbac kernels during installation, please check your bootloader configuration before reboot
• The kernel is installed with the option "rsbac_softmode"
• You could be interested to use the "rsbac_cap_process_hiding" kernel option too
• During the rsbac-admin installation the user secoff is created, but you must add the password by hand before reboot with the rsbac kernel otherwise you cannot login as secoff
• If you install the rsbac-scripts check /etc/sysconfig/rsbac and be sure to allow MANUAL softmode for the first boot with an RSBAC kernel
• keep an original RedHat kernel, you never know what could happen, and leave it as default boot until your are sure of everything working
• if you do not use the rsbac-scripts, after the boot with the rsbac kernel you are on your own
• if you use the rsbac-scripts, after the first boot in softmode (MANUAL) login as secoff and cd to scripts/ and read the docs in docs/, then
  1. configure the scripts in etc/
  2. run the scripts with "scripts/bin/runall start"
  3. reboot again for a clean start
  Please help develop these scripts.

Andrea Pasquinucci cesare-AT-ucci.it