INSTALL

Install the rpms in the following way and order:

  rpm -Uhv rsbac-admin-1.2.N-bfM.fcX.NN.i386.rpm

  rpm -ihv --oldpackage kernel-2.6.x-rsbac_v1.2.N_bfM_pax_soft.i686.rpm

If you want to try also the scripts

 rpm -Uhv rsbac-scripts-N-fcX.NN.noarch.rpm


NOTES:

- It could happen that the kernel option "rsbac_softmode" is added also to 
  non rsbac kernels during installation, please check your bootloader
  configuration before reboot

- The kernel is installed with the option "rsbac_softmode"

- You could be interested to use the "rsbac_cap_process_hiding" kernel
  option too

- During the rsbac-admin installation the user secoff is created, 
  but you must add the password by hand before reboot with the rsbac kernel
  otherwise you cannot login as secoff

- If you install the rsbac-scripts check /etc/sysconfig/rsbac and 
  be sure to allow MANUAL softmode for the first boot with an RSBAC kernel

- keep an original RedHat kernel, you never know what could happen, and
  leave it as default boot until your are sure of everything working

- if you do not use the rsbac-scripts, after the boot with the rsbac kernel
  you are on your own

- if you use the rsbac-scripts, after the first boot in softmode (MANUAL)
  login as secoff and cd to scripts/ and read the docs in docs/, then
    1. configure the scripts in etc/
    2. run the scripts with "scripts/bin/runall start"
    3. reboot again for a clean start
  Please help develop these scripts.



Andrea Pasquinucci
cesare-AT-ucci.it